Louann Fassbinder asked 3 days ago
Read more from buy plumbing parts online.
The practical test is simple: add a few drops of food colouring to the cistern water and wait without flushing. Colour appearing in the pan points to the flush valve or siphon. A water level that keeps rising past where it should sit points to the fill valve. Checking both takes two minutes and saves a second visit.
A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon’s all-or-nothing action makes a genuine short flush difficult to achieve, http://www.plumb2u.com whereas a valve can simply be held open for a shorter or longer period.
Measuring before ordering saves a return trip: the thread diameter of the existing lever body, the distance from the lever mounting to the flush valve connection point, and whether the arm needs to sit above or below the water line all affect which replacement will actually fit. A lever bought to the wrong thread size will not seal against the cistern wall, however well the rest of the job goes.
Find out more at trade plumbing supplies.
A low-level cistern, by contrast, is fixed to the wall a short distance above the pan and connects down to it through a visible flush pipe, usually around 32mm or 38mm depending on the specification. This changes several things at once: the flush valve or siphon outlet needs to accept that flush pipe rather than seal directly onto the pan, the fill valve can often be a longer-bodied type since there is more depth in the tank, and the lever or handle mechanism sits at a different height and angle relative to the flush arm.